DSP6604/DSP6606/DSP6608 Multimedia Lecturing Wall Mount Speaker

Features

● Focus on sound quality, inverse-phase type design, and equipped with high pitch and low pitch double unit, clear sound level, mellow, transparent, clear and bright, strong bass;
● Strong input, power rating 2x20W/2x30W/2x40W three optional;
● With balance and non-balance microphone input;
● Main and auxiliary boxes configured, super voice reproduction;
● Built-in Hi-Fi digital power amplifier, low power waste design;
● Can adjust the high and low pitch raise of the input signal;
● Can adjust the output volume of the speaker;
● Features a 3.5mm auxiliary output connector for extended output power;
● With auxiliary input, and priority input functions such as AUX1, AUX2;
● With priority for MIC string interpolation.

Contact now Leave message Download

Introduction
Specification

This product is a multifunctional high fidelity active wall speaker ,which isequipped with white or black to choose as well as convenient installation. Remote audio data flow through the machine output audio signal, and sound is from the speakers directly. Auxiliary audio output interface can be used to connect to other power amplifier to extend power; another two wired microphone input interface (and the company UHF wireless microphone system collocation) can realize super voice reproduction and the input signal of high - and low gain regulation. The machine also has other rich interface for you to choose.

Model		DSP6604	DSP6606	DSP6608
LINE input (RCA &3.5)	Input impedance	＞10kΩ
	Sensitivity	30±300mV
	Frequency response(20Hz- 20KHz)	±3dB
	Distortion degree	≤1%
	Signal-noise ratio	≥81dB
	BASS gain(100 Hz)	±8dB
	TREBLE GAIN (10KHz)	±8dB
AUX1 (alarm Signal input)	Input impedance	＞10kΩ
	Sensitivity	1.0±0.1V
	Frequency response(20Hz- 20KHz)	±3dB
	Distortion degree	≤1%
	Signal-noise ratio	≥81dB
AUX2 (broadcast Signal input)	Input impedance	＞10kΩ
	Sensitivity	500±50mV
	Frequency response(20Hz- 20KHz)	±3dB
	Distortion degree	≤1%
	Signal-noise ratio	≥81dB
MIC input (XLR &6.3)	Input impedance	＞600Ω
	Sensitivity	40mV @ XLR input
		300mV @ 6 .3 input
	Frequency response(80Hz- 16KHz)	±3dB
	Distortion degree	≤1%
	Signal-noise ratio	≥70dB
	BASS gain(100 Hz)	±8dB
	TREBLE gain(10 KHz)	±8dB
Pre-out signal input	Output amplitude	1.0±0.1V
	Frequency response(20Hz- 20KHz)	±3dB
	Distortion degree	≤1%
	Signal-noise ratio	≥90dB
Amplifier Output	Rated power	2×20W/8Ω	2×30W/8Ω	2×40W/8Ω
	Signal-noise ratio	≥81dB	≥81dB	≥81dB
Speaker	Low pitch unit	4-inch	5-inch	6.5-inch
	High pitch unit	1-inch	1-inch	1-inch
	Sensitivity	90dB±2dB	90dB±2dB	91dB±2dB
	Max. sound pressure level	103dB±2dB	105dB±2dB	106dB±2dB
	Frequency response	95Hz-20KHz	80Hz-20KHz	65Hz-20KHz
	Distortion degree	≤5%	≤5%	≤5%

PREV: DSP8114N 60W IP/SIP Network Waterproof Column Speaker

NEXT: DSP6609 Classroom Voice Amplification

Relate Products

DSP8116N 120W Network Waterproof Column SpeakerAugust 18, 2022DSP8116N uses the speaker unit of high sensitivity and high dynamic range, and two-way frequency design, with strong bass and clear treble. It has a built-in digital amplifier with low distortion, low...view
DSP8114N 60W IP/SIP Network Waterproof Column SpeakerAugust 15, 2019DSP8114N uses the speaker unit of high sensitivity and high dynamic range, and two-way frequency design, with strong bass and clear treble. It has a built-in digital amplifier with low distortion, low...view
DSP8116A 120W Network Waterproof Column SpeakerMarch 22, 2023DSP8116A uses the speaker unit of high sensitivity and high dynamic range, and two-way frequency design, with strong bass and clear treble. It has a built-in digital amplifier with low distortion, low...view

Leave a Message Email Us

we will contact you within 24 hours.